Resonance Engineering Convention Workshop.
We are having two days of meetings on Aug 3rd and 4th in Charlotte North Carolina at COMFORT SUITES AIRPORT 3425 Mulberry Church Road, Charlotte, NC, 28208. This will be right at the airport to make it easy for people who fly in.
This will be the second of a new kind of meeting where we get very focused on Resonance and Nonlinear Engineering with high frequency which will also be applied to our new model motors in what we have called the third stage process. We will be introducing the new Larger Resonance kit at this meeting. These are available to order now. Resonance kits ordered with registration will be received at the meeting. We will also be introducing the new Renaissance Solar Controller.
Come learn about batteries, how to rejuvenate and keep your batteries, and about practical alternative energy solutions. Watch as we demonstrate motors of various sizes powering lights, fans, generators, etc., while charging batteries at around the same rate as the batteries powering the motors are discharging (which is thought to be impossible). We have been doing these meetings all over the country and in Europe since 2010.
Come for a day or both days. Add the Resonance kit for the Workshop.
The first day will go over all the details about proper battery charging, all the battery chargers/rejuvenators we sell (these allow you to restore most useless batteries and keep them), an introduction to the free energy motor systems, the most significant overunity demonstration, and we will spend three hours doing a workshop where people can build the new Resonance Induction Coupler Kit or watch others build it.
Day One Workshop: (Friday Aug 3rd)
Day Two (Saturday Aug 4):
8:30-10:00 Resonance Open Nonlinear Engineering
10:15-11:15 Resonance Demonstrations/Alternative Energy Demonstrations
Comfort Suites Airport 3425 Mulberry Church Road, Charlotte, NC, 28208
- The Renaissance Charger Controller
- The Renaissance Induction Coupler Kit
- The Large Resonance Induction Coupler Kit
- The Renaissance Chargers/Rejuvenators
- The DualPole Motor Energizers
- The Magnet Motor Energizers
- The Brushless Fan Energizers
- The Renaissance Heating System
- The Overunity Demonstrations
PREVIOUS MEETINGS AND DEMONSTRATIONS BELOW:
Shows the 4 DualPole running an industrial fan,12" motor with 10KW generator,
and 10 Coiler and mini 4 DualPole in self-running mode.
SELF-SUSTAINING MOTORS SHOWN AT CONVENTIONS
Last weekend (this was two years ago now) we had the best Convention Workshop ever. It was a small meeting due to being the holiday season but it was enjoyed by all. The highlight of the meeting were two different motors running while their batteries were charging. That is not only were the secondary output batteries charging but the primary batteries powering the motor were also kept in a charging state as additional loads were placed on the output of the motor. We also gave the background information about what we were doing to the system. We started off the meeting showing the little mini magnet motor kit powering the mini DualPole kit, and then later the mini DualPole kit self-sustained while we added various LED loads on the output. Later we ran the 10 coiler DualPole kit with only 2 of the motor coils hooked up to circuits. 8 motor coils and 10 generator coils were not connected (due to lack of time) but placed a significant load on the wheel rotation. The motor was run at 24 volts and around 5-6 Amps. Three 9000 lumens 100W LEDs were powered and a stove top cooking element was heated on the front side of the circuit, while 24V of golf-cart batteries were being charged on the secondary side. When we added another 'open paths' process to the system everyone could see the three LEDs go to full brightness, the primary battery stop discharging, and two 11000 lumens LEDs go to full brightness (we had to cover them they were so bright). This demonstration ended up damaging one of my clamp ampere-meters due to the very amplified negative energy intensity. We also showed how the industrial 12” magnet motor can power a 10KW generator while charging batteries. Also shown was the larger 4 DualPole motor running a large industrial fan at variable speeds with our water-cooled mosfet controller. The setup represented a forced air heating or cooling and lighting system. We powered 4 100W LEDs very brightly with the generator coils at the same time. The motor was run on 24V of 35AH batteries up to 50A and charged two more of the same batteries at the same time.
Renaissance Charge, LLC.
ATTENTION: THIS IS NOT A STORY-TELLING EVENT BUT A LIVE DEMONSTRATION OF OVERUNITY SYSTEMS. TIME WILL BE GIVEN TO ANSWER YOUR PRACTICAL APPLICATION QUESTIONS. DON'T MISS THIS HISTORIC MEETING.
- To learn about cutting edge technology that is changing the world.
- To meet other like-minded people and make personal and business connections.
- To participate in workshops where we build these systems together the right way.
- To have lots of fun and to be amazed!
Chicago March 2015 Meeting
The Ten Coiler DualPole Motor in the new configuration.
Presenting the Renaissance Charger collection.
Going over the details about battery charging.
Which box are you in?
Explaining the operation of the 10 Dualpole Motor.
Contact us at firstname.lastname@example.org to arrange to bring your batteries to be used and/or rejuvenated during the meetings.
Renaissance Porsche shown in CDA Idaho 2011
Renaissance Boat demonstrated in CDA IDAHO 2011